其 它 资 源 产 品
 
 
铁矿砂

一:规格

1、 Iron Fines

  Chemical Composition(on dry basis)   Guaranteed (% by weight)
  Fe   57.00 min
  P   0.05 max
  S   0.03 max
  Cu   0.01 max
  Al2O3   3.00 max
  SiO2 plus Al2O3   9.00 max
  Other metals not mentioned above and
  Excluding Ca, Ti, Mg, Na and K   0.15 max
  SiO2/Al2O3 Ratio   1.50 min
  Loss On Ignition   9.30 max
·Moisture Content
  Free Moisture loss at 105 Degrees Centigrade shall not exceed a nominal 8%
·Physical Specification
  Fine ore to be delivered shall be sized nominally between 9.5mm and 0.15mm on a square   aperture screen on a natural basis.

2、 Iron Ore Lump

  Chemical Composition (on dry basis)   Guaranteed (% by weight)
  Fe   57.00 min
  P   0.05 max
  S   0.03 max
  Cu   0.01 max
  Al2O3   3.00 max
  SiO2 plus Al2O3   9.00 max
  Other metals not mentioned above and
  Excluding Ca,Ti, Mg, Mn, Na and K   0.15 max
  SiO2 / Al2O3 Ratio   1.50 min
  Loss On Ignition   9.30 max
·Moisture Content
  Free Moisture loss at 105 Degrees Centigrade shall not exceed a nominal 8%
·Physical Specification
  Lump ore to be delivered shall be sized 6.0mm 35mm on a natural basis.

3、Iron Ore Fines

  Chemical Composition(on dry basis)   Guaranteed (% by weight)
  Fe   61.5
  SiO2   3.00
  Al2O3   1.90
  Chemical Composition(on dry basis)   Guaranteed (% by weight)
  P   0.07
  S   0.01
  CaO   0.02
  TiO2   0.037
  MgO   0.048
  Mn   0.27
  Loss On Ignition   6.20 max
·Moisture Content
  Free Moisture loss at 105 Degrees Centigrade shall not exceed a nominal 8%
·Physical Specification
  Lump ore to be delivered shall be sized between 0.15mm and 6.3mm on a natural basis.

4、 Iron Ore lump

  Chemical Composition(on dry basis)   Guaranteed (% by weight)
  Fe   62.5
  SiO2   2.36
  Al2O3   1.2
  P   0.054
  S   0.015
  CaO   0.02
  TiO2   0.037
  MgO   0.048
  Mn   0.33
  Loss On Ignition   6.20 max
·Moisture Content
  Free Moisture loss at 105 Degrees Centigrade shall not exceed a nominal 8%.
·Physical Specification
  Lump ore to be delivered shall be sized between 6.3mm and 31.5mm on a natural basis.

 

二.装港:澳洲沃仑特港

三.装率:12万吨/24小时晴天工作日

四.船舶:可以停靠20万吨级散货船

五.质检:以CIQ结果为准

 

版权所有:阿泰克公司/澳森诺公司   网站监制:菲瑞克/戴尔塔/托马克林业公司
阿泰克公司/澳森诺公司山东代表处  Tel:0533-2831251/2  Fax:0533-2831250  e-mail:ausino@vip.sina.com